Felt rolls
Continuous lengths for cutting down in your own workshop.
Wool and non-woven felt supplied on the roll, in widths and thicknesses to order.
Chosen by workshops that cut their own parts, and by mills keeping stock against a breakdown.
Specification
- Thickness
- 1 mm to 50 mm
- Density
- 0.15 to 0.60 g/cm³ — soft through extra hard
- Roll width
- To 220 cm
- Supplied as
- Continuous roll, cut to your length
Ranges are the standard the material is made to. Tell us the size, thickness and quantity you need and it will be quoted against them.
Typically used for
Density classes
Soft0.15 – 0.23Padding, packing, dust shields, sound deadening
- Looks like
- Open and loose along the cut edge. You can see the individual fibres, and light gets into the surface.
- Feels like
- Squashes easily between finger and thumb, and springs most of the way back. The softest we supply.
- Comes as
- Sheet or roll. Cuts with a knife or a press without needing a machine.
- Tell us
- Thickness, the sheet size you want, and what it is padding or protecting.
Medium hard0.24 – 0.30Oil wicks, general seals, damping pads
- Looks like
- Tighter than soft. The edge still shows fibre, but it holds a clean straight line when cut.
- Feels like
- Firm, and gives under thumb pressure without collapsing. This is the general-purpose one — if you are unsure, start here.
- Comes as
- Sheet, roll, or cut to your shape. The usual choice for wicks and seals.
- Tell us
- Thickness, and whether it is sealing, holding oil, or absorbing vibration.
Hard0.31 – 0.44Washers, bearing seals, wear strips
- Looks like
- Dense and close. The edge is clean and smooth, more like board than cloth.
- Feels like
- Barely gives under your thumb. Stiff enough to stand a sheet on its edge.
- Comes as
- Sheet, or cut and punched to your drawing. Holds an accurate shape once cut.
- Tell us
- The part it replaces, or a drawing with the sizes on it.
Extra hard0.45 – 0.75Polishing wheels and bobs, high-load seals
- Looks like
- Almost solid to look at. Very little fibre visible at the edge.
- Feels like
- Hard, closer to firm rubber than to cloth. Does not squash by hand.
- Comes as
- Wheels, cones and heads for polishing, or sheet for heavy-duty parts. Can be turned to shape on a lathe.
- Tell us
- For polishing, the wheel diameter and the spindle it fits. Otherwise, the part it replaces.
Photographs show what each grade looks like, not a particular batch. We source these goods rather than make them, so shade and finish vary a little between mills.
Both open WhatsApp. The order arrives with the blanks laid out — fill in grade, size and quantity and we will confirm price and lead time.